Theben Ceiling Mount Surface Motion Detector – LUXA103-360AP


Product Description

Theben Ceiling Mount Surface Motion Detector – LUXA103-360AP

  • Theben GERMANY
  • Motion detector (PIR)
  • Automatic lighting control based on presence and brightness
  • 1 channel
  • Ceiling installation
  • Mixed light measurement suitable for the control of fluorescent, incandescent and halogen lamps
  • Zero-cross switching for relay-saving switching and high lamp loads
  • Single-handed plug-in installation with captive screws
  • Instant start-up possible via factory preset
  • No unintentional adjustment due to covered up controls
  • Adjustable brightness switching value and switch-off delay
  • Sensitivity can be reduced to limit detection area
  • Impulse function
  • Test function

Technical data

Operating voltage 230 V AC
Frequency 50 – 60 Hz
Stand-by consumption 1 W
Light measurement Mixed light measurement
Number of channels 1
Type of contact NO contact
Installation type Ceiling installation, Surface mounted
Setting range brightness 10 – 2000 lx Infinitely adjustable
Switching capacity light 10 A (at 230 V AC, cos φ = 1), 3 AX (at 230 V AC, cos φ = 0.3)
Detection angle 360°
Recommended installation height 2 – 3 m
Light switch-off delay 5 s–20 min
Incandescent lamp load 1000 W
Fluorescent lamp load (conventional) parallel-corrected 400 VA 42 µF
Lamps Incandescent/halogen lamps, fluorescent lamps, energy saving lamps, LEDs
Ambient temperature +0 °C … +45 °C
Protection class II
Type of protection IP 40
Share on Facebook0Share on Google+0Tweet about this on TwitterShare on LinkedIn0Pin on Pinterest0Share on StumbleUpon0